how-sure

What must the survey resolve?

English · Русский

A magnetic survey check for one geological question, before the survey is flown.

For geologists who ask for a magnetic survey and then have to live with what it can and cannot show. Describe the body you need to see and the survey you have in mind; the page tells you whether the body will stand above the noise, whether two bodies will show as two, and how far apart the lines can be.

Why it matters in petroleum work: where igneous intrusions cut a sedimentary basin, dolerite sills and dykes blur the seismic image, can break up reservoirs and seals, and cause trouble while drilling. Magnetic data map them cheaply, before the wells are placed.

Open the page · download the file (one HTML file, works offline in any browser)

The page on its made-up example: a dyke 20 m wide, its top 300 m below ground, seen from 80 m

What it tells you

The example (made up)

A dolerite dyke 20 m wide, its top 300 m below ground, susceptibility contrast 0.02 SI, Earth’s field 55,000 nT, noise 0.5 nT, sensor 80 m above ground. A second dyke runs 300 m away.

How it works

For a body that runs a long way down, magnetised by a vertical field, the anomaly is proportional to the angle its top subtends at the sensor; for a plug, to the solid angle; for a sill edge, to the angle of its top minus the angle of its base. Depth and sensor height add up: what counts is h, the distance from the sensor to the top of the body. The 2D formulas are the textbook ones (Blakely, 1995).

Bodies: a vertical dyke of given width; the edge of a horizontal sill of given thickness; a plug as a vertical cylinder of given diameter.

Rules: the 5 × and 2 × thresholds and the 70 % rule for line spacing are my conventions. Reid (1980) gives up to about 2 h for a smooth total-field grid, about h for gradients and h/2 for a single point-like target (reviewed by Saltus, 2026). Two-body splitting is judged on a noise-free total-field profile that crosses both bodies; a vertical-derivative map can split them a little closer if the noise allows. For a sill edge the verdict uses the high on one side; the swing to the low beyond the edge is twice that, so the verdict errs on the safe side.

The height presets are typical starting values for ground, low-clearance UAV, helicopter and fixed-wing surveys. They are parameters, not a record of surveys flown. In a project, the geologist sets the question and interprets the data; a licensed contractor designs and flies the survey.

Checked against known answers

The page carries 24 checks and shows the result at the bottom: ALL 24 PASS (checked in Microsoft Edge). Each check compares the page with an answer worked out another way:

Change the code and break a formula, and a row turns FAIL.

Limits

Files

File What it is
magnetic-survey-check.html The page: one file, no internet needed, no data leaves the browser
physics_ref.py Independent dipole sums behind the checks (Python, numpy)
screenshot-page.png The page on its example

References: Blakely, R. J. (1995). Potential Theory in Gravity and Magnetic Applications. Cambridge University Press. Reid, A. B. (1980). Aeromagnetic survey design. Geophysics, 45(5), 973–976. doi:10.1190/1.1441102. Saltus, R. W. (2026). Evaluation of aliasing in aeromagnetic surveys: update to Reid 1980 analysis. Earth and Space Science. doi:10.1029/2025EA004336

Built with AI assistance; the geology and the checks are mine.

Licence: CC BY 4.0. Maxim Balagurov, petroleum geologist · v1.1 · DOI 10.5281/zenodo.24242389